BASS TRIO BEHRINGER
3 Pedal Pack + Pedal Floor Board
BASS TRIO PACK
The BEHRINGER BASS TRIO takes the guesswork out of creating a killer effects chain for bass tones. Our design team consists of performing musicians who know what works best, no matter the venue. All we had to do was ask, and they put together the BUC400 Ultra Bass Chorus, BLE100 Bass Limiter Enhancer and BOD400 Bass Overdrive. We even included the necessary cabling you need to put these pedals between your guitar and amplifier!
Cavernous Chorus
At long last, there’s a bass/keyboard chorus pedal that provides super-thick stereo chorusing without sacrificing the lows! The ULTRA BASS CHORUS BUC400 applies a warm, rich chorus to only the upper frequency range of your signal, allowing your bottom-end to retain all its punch and definition. The “secret” is the extremely unique SHAPE control that lets you determine how much of the low frequency content is affected by the chorus. It functions very much like a crossover circuit, allowing you to keep the bottom-end full and tight, while creating stunning top-end shimmer. The LEVEL control is used to raise and lower the output of the BUC400 and the RATE and DEPTH controls set the speed and fullness of the chorus effect.
Get Enhanced!
Sound engineers and professional bass players have known for years that high-quality limiting and enhancement makes bass tracks pop in the mix. The BASS LIMITER ENHANCER BLE100 gives your playing that same velvety finishing touch by smoothing out inconsistent volume peaks. By its very nature, extreme compression tends to suck the high-end out of any signal, so we added a tone compensation circuit to the BLE100. This dedicated Enhance control lets you dial in just the right amount of sparkle, without giving your bass that over-processed or brittle sound. This feature alone will make the BLE100 one of your favorite secret weapons!
Awesome Overdrive
Here’s an overdrive pedal that supports the entire frequency range of bass guitars, even 5 & 6-stringers. The best part of all, the BASS OVERDRIVE BOD400 was designed specifically for bass, so the bottom-end won’t drop out when you pull the trigger. One of BOD400’s coolest features is its BALANCE control, which lets you mix the overdriven signal with your natural bass sound for superb clarity, punch and extraordinary character. That way you can add the perfect amount of tube-like tone, without sacrificing all of your precious low-frequency content.
Value
Save yourself time and money on the way to your ideal bass tones. Pick up the BASS TRIO at your nearest BEHRINGER dealer and get effected!
Specifications:
<Get serious low-end rumble with this set of stompboxes for modern bass guitar sounds
<The BASS OVERDRIVE BOD400 provides tube-like distortion and super fat tone, with Balance control to blend between overdriven and dry bass sound for maximum punch
<The BASS LIMITER ENHANCER BLE100 smoothes out harsh volume peaks when using dynamic slaps or other playing styles
<The ULTRA BASS CHORUS BUC400 gives you super thick chorus with unbelievable stereo effect
<High-quality components and exceptionally rugged construction ensure long life
<Conceived and designed by BEHRINGER Germany
PEDAL FLOOR BOARD
When effects are an integral part of your rig, their power adapters and patch cables can often be the most vulnerable part, and the most likely to sabotage your set if they're not pampered. Rather than tossing your pedals, power adapters and all other cabling into a duffel bag after a gig, keep them safe—and ready to rock at a moment’s notice—with the PB600.
It's All About Connections
This awesome pedal board makes hooking up six 2.5" x 4.5" pedals as easy as hooking up just one (of course, if you’re using pedals that aren’t 2.5" x 4.5", the snug foam padding can be cut to accommodate pedals of varying shapes). The PB600 includes 1/4" patch cables, so you can leave your pedals connected to one another, ready to pass signal even when you’re transporting them. It also comes with 1 x 6 daisy chain cabling so that when you plug in the 1.7 A power adapter, all your pedals receive power. Meanwhile, all cabling remains safe and free of strain. Failure is almost guaranteed when you’re dealing with a rat’s nest of loose cabling, but with the PB600, your effects chain is always safe and organized.
Connect your guitar, bass or keyboard to the single 1/4" input in the upper right corner of the board. A pair of 1/4" FROM EFFECTS jacks in the upper left corner allow you to connect stereo effects, and two 1/4" OUTPUT TO AMP jacks send a left and right stereo signal to up to two amps.
When it’s time to load out, just unplug the power supply, disconnect your guitar and amp, put the lid back on the PB600 and slide the locking latches back into place. The heavyimpact plastic casing will protect your pedals from the very worst dings, scrapes and scratches the road throws your way.
Features:
< Ultra-compact and lightweight pedal board for transporting up to 6 effects pedals, including patch cables
< Generous 1.7 A power adapter included for powering more than 12 devices*—includes 1 x 6 daisy-chain cabling
< Ultra-rigid plastic design withstands even heavy impact
< High-quality components and exceptionally rugged construction ensure long life
< Conceived and designed by BEHRINGER Germany
Click link below to view manufacturer's specs...
http://www.behringer.com/EN/Products/PB600.aspx
SALE: $189.99
SAVE $10.00 AT CHECKOUT
USE PROMO CODE: BASSTRIO
FREE S&H in continental US (e-mail for international rates)
