POWER PACK BEHRINGER
Feedback Destroyer & 460w Amplifier
FBQ1000
The FBQ1000 Feedback Destroyer is the fastest feedback suppressor on the market, with a response time of less than 0.2 seconds. Whether you use it to kill feedback dead in its tracks for your mains and/or monitors, or as a sophisticated parametric equalizer to fine-tune the acoustics of your next gig, the FBQ1000 will bring a new level of finesse to your sound. And if you use in-ear-monitors, the FBQ1000 is a must-have to protect your most valuable assets—your ears!
One Smart Solution
Using an ultra-fast feedback detection algorithm, the FBQ1000 automatically and “intelligently” locates up to 12 feedback frequencies per channel. The algorithm then sets extremely narrow notch filters (up to 1/60th of an octave) to “destroy” feedback frequencies, leaving the remainder of your signal virtually untouched. And with the “Set-and-Forget” default setting, your Feedback Destroyer can be up and running in a matter of seconds.
Ease of Operation
The Auto Mode continuously monitors the mix, resetting programmed filters automatically to eliminate the slightest hint of feedback, without you having to do anything at all. It just doesn’t get much easier than that! If you prefer a more “hands-on” approach, the Manual Mode allows you to program up to 24 fully parametric filters (with frequency, bandwidth and gain controls) to optimize your sound to the room’s acoustics.
Be Prepared
The FBQ1000 is the quick and easy way to protect yourself and your audience from live sound’s #1 enemy—feedback! Plus it’s rack-mountable and ultra-affordable. With the FBQ1000's various modes, you can master virtually any live sound situation or use the unit as a creative sound-shaping tool. A single FBQ1000 can protect you from feedback in both your mono PA mains and a monitor mix. Check one out at your nearest BEHRINGER dealer today. Your ears and your audience will thank you.
Specifications:
n High-performance 2-channel Feedback Destroyer and Parametric EQ
n Automatically and "intelligently" locates and destroys up to 24 frequencies
n Ultra-narrow FBQ filters for extremely effective feedback suppression, while keeping highest sonic quality
n "Set-and-forget" default setting enables immediate and super-easy Feedback Destroyer performance
n Auto mode continuously monitors the mix and automatically sets filters
n Single-Shot mode automatically detects and destroys feedback plus locks the filter until you reset it manually
n Manual mode allows setting of up to 24 fully parametric filters with individual frequency, bandwidth and gain parameters
n Extensive MIDI implementation and user preset memories for instant program recalls
n Balanced inputs and servo-balanced outputs with ¼'' TRS and gold-plated XLR connectors
n High-quality components and exceptionally rugged construction ensure long life
n Conceived and designed by BEHRINGER Germany
Click link below to view manufacturer's specs...
http://www.behringer.com/EN/Products/FBQ1000.aspx
EPQ450
The EPQ Series power amplifiers pack the power of Accelerated Transient Response (ATR) technology into an exceptionally lightweight package. Ample power and high-tech efficiency combine to give you a feather-light supercharged workhorse that will keep your rig kicking for years to come.
Accelerated Transient Response Delivers the Knockout Punch
It takes huge pulses of energy (current and voltage) to propel a woofer cone out fast enough to match a bass beat. That’s called Transient Response and it’s the holy grail of amp designers. By carefully selecting transistors with extremely high slew rates and optimizing other proprietary parts of our circuitry, our amps are able to react instantly to even the most demanding electronic bass impulses. If the woofers in your PA system can keep up, your audience will hear a tighter, crisper, more natural sound
Instead of operating relatively continuously like most power amps, the EPQ power amps feature rail tracking for effectively modulating the power supply rails with only the peaks of the input signal. This technology has revolutionized pro audio amp designs with its outstanding performance and efficiency. When combined with switching-mode power supplies that do away with heavy toroid transformers, our new designs provide more dynamic punch and, because they are so much more efficient, run cooler and don’t require huge, heavy heat sinks.
BEHRINGER didn’t invent this technology, but our R&D Department has been working for years to perfect our own version, creating lightweight amps that run cool and also achieve our goal of Accelerated Transient Response.
Everything You Need
The simple front panel controls of these amps give you all of your sound’s vital signs at a glance. After pressing the Power Button, the POWER LED will light when the amp is ready for action. Both channels have independent gain dials as well as clip LEDs that indicate when the signal is distorted and you need to reduce the gain. There are also SIGNAL LEDs that light up when a signal is present at the input.
On the back panels of the EPQ2000 and EPQ1200, the INPUTs accept balanced XLR, 1/4" TRS, and unbalanced 1/4" TS and RCA connections. Take your pick of professional locking speaker outputs or touch-proof binding posts to securely connect speakers. The same panel contains the switches that allow you to put these amps to work in either mono, stereo (two channel mode) or mono bridge mode. A built-in CROSSOVER switch allow you to send low frequency content to subwoofers and other sound reinforcement speakers (CH1 < 100 Hz / CH2 > 100 Hz or FULL RANGE). Flick the LIMITER ON/OFF switch to activate the built-in overload protection, or turn it off if you’re feeling lucky.
The back panels of the EPQ304, EPQ450 and EPQ900 accept balanced XLR. The EPQ450 and EPQ900 have MONO On/Off and BRIDGE On/Off switches. The EPQ304 has an MONO On/Off switch for INPUTS 1 AND 2, and another MONO On/Off switch for INPUTs 3 and 4.
Value
BEHRINGER’s new EPQ power amps are built for the working musician. They are exceptionally light, they pack massive power and they are built to last through all the rigors of the road. Plus its light price tag will leave you with enough cash left over to acquire more stuff to amplify! Check out the EPQ series and find out why BEHRINGER power amps are among the most popular on Earth.
Specifications:
n 2 x 230 Watts into 4 Ohms; 2 x 130 Watts into 8 Ohms
n ATR (Accelerated Transient Response) technology for ultimate punch and clarity
n Ultra-light, ultra-low noise and ultra-efficient switch-mode power supply for noise-free audio, superior transient response and low power consumption
n Independent limiters for each channel offer maximum output level with reliable overload protection
n Detented gain controls for precise setting and matching of sensitivity
n Precise Power, Signal and Clip LEDs to monitor performance
n Servo-balanced XLR and 1/4" TRS inputs plus professional speaker connectors
n Independent DC and thermal overload protection on each channel automatically protects amplifier and speakers without shutting down the show
n “Back-to-front” ventilation system including air filter for reliable operation
n "Built-like-a-tank", impact-resistant and all-steel 1U rackmount chassis
n Minimum depth chassis (10.1" / 257 mm) and ultra-light weight design (10.3 lbs / 4.7 kg) fits into compact, inexpensive effects racks
n High-quality components and exceptionally rugged construction ensure long life
n Conceived and designed by BEHRINGER Germany
Click link below to view manufacturer's specs...
http://www.behringer.com/EN/Products/EPQ450.aspx
SALE: $329.99
SAVE $30.00 AT CHECKOUT
USE PROMO CODE: POWERPACK
FREE S&H in continental US (e-mail for international rates)
