TASCAM SD-20M AC or Battery Powered Rackmount Digital Recorder

TASCAM
SKU:
178871
|
UPC:
43774032211
$299.99
(No reviews yet)
Shipping:
Free Shipping
Current Stock:

 SD-20M  TASCAM 

 

 4 Track Rackmount Recorder 

 

 

Tascam SD-20M is a simple-to-use solid-state recorder for demanding installations. The 1U rackmount includes a pair of microphone preamps with phantom power for direct microphone recording. Both the mic inputs and line inputs can be recorded simultaneously in four-channel mode. The dual recording mode captures a copy of your audio at a lower level, as insurance against distorted takes.

 

The SD-20M includes a battery backup system. AA batteries can keep recording for hours in case of power loss. A wired remote or footswitch can be attached to control recording and playback. Variable speed playback allows the playback to be changed without affecting the pitch. Designed for installations like schools, house of worship, and conferences, the SD-20M is a flexible, affordable solution for long-form recording.

 

Features:

 

  • XLR/TSR combo microphone inputs on the front panel

  • Four-track recorder capable of simultaneously recording from both the mic inputs and line inputs

  • Dual recording function captures a copy of your audio at a lower level, for a distortion-proof safety track

  • Can record a copy of the audio at a lower level according to the set audio recording level. This allows for a backup recording in case of distortion from unexpected loud noises.

  • In addition to the AC adapter, it can also operate using four AA batteries, which allows for recording to continue even if AC power is lost

  • Compatible with SD, SDHC and SDXC media.

  • SDXC media slot supports up to 128 GB cards for long recordings

  • High-resolution recording up to 96kHz/24-bit in WAV/BWF format.

  • MP3 format for making long recordings.

  • Equipped with a Tempo change (VSA) function for adjusting the speed from 0.5 to 1.5 times (in 0.1 increments), which is great for language study.

  • XLR/TRS combo locking balanced inputs - mic level with switchable +48V phantom power, and +4 dBu line level (TRS) for balanced input from mixers, etc.

  • RCA inputs compatible with -10dBV line level unbalanced input from mixers, etc.

  • Auto recording function that can detect the sound input signal level and automatically start recording

  • Low-cut filter with three levels (40, 80, and 120 Hz)

  • Compatible with Japanese language display

  • Mounts in a single rackspace

Specification:
 

Recording Media

  • SD card (64 MB to 2 GB)

  • SDHC card (4 GB to 32 GB)

  • SDXC card (48 GB to 128 GB)

Audio Recording/Playback Format

  • BWF: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 16/24-bit

  • WAV: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 16/24-bit

  • MP3: 44.1/48 kHz, 32/64/96/128/192/256/320 kBps

  • Number of Channels: 4 channels (stereo x 2)

Mic/Line Inputs

  • 2 x Combo Jacks: XLR-3-31 (1: ground, 2: hot, 3: cold)

  • 1/4" (6.3 mm) TRS jack (Tip: hot, ring: cold, sleeve: ground)

Mic Input Impedance

  • Front jacks set to Mic

  • 2.7 kOhms (phantom power supported)

  • Maximum Input Level: 0 dBu (gain: low)

  • Minimum Input Level: −67 dBu (gain: high)

Line Input Impedance

  • Front jacks set to Line

  • 10 kOhms or higher

  • Nominal Input Level +4 dBu

  • Maximum Input Level: +20 dBu

  • Minimum Input Level: -12 dBu

Line Input Impedance

  • Line inputs 3/L and 4/R (unbalanced, RCA jacks)

  • 10 kOhms or higher

  • Nominal Input Level -10 dBV

  • Maximum Input Level: +6 dBV

  • Minimum Input Level: -26 dBV

Audio Output Jacks

  • Nominal Output Level -10 dBV

  • Maximum Output Level: +6 dBV

  • Output Impedance: 200 ohms

Headphone Output

  • 1/4" (6.3 mm) standard stereo jack

  • Maximum Output Power: 20 mW + 20 mW (32 ohms load, 0.1 % distortion)

  • Remote Control Connector: 1/16" (2.5 mm) TRS micro jack

Frequency Response

  • 20 Hz to 20 kHz +1/-3 dB (input 1-2 to output, Fs 44.1/48 kHz)

  • 20 Hz to 40 kHz +1/−3 dB (input 1-2 to output, Fs 96 kHz)

  • Distortion: 0.01 % or less (Input 1-2 to output, Fs 44.1/48/96 kHz)

  • Signal to Noise Ratio: 100 dB or more (input 1-2 to output, Fs 44.1/48/96 kHz)

Unit

  • Power Supply: Dedicated AC adapter (TASCAM PS-P1220E), 4 AA batteries (alkaline, NiMH, or lithium)

  • Power Consumption: 5 W (maximum)

  • Input Current: 1 A (maximum)

  • Operating Temperature Range: 41 to 95°F (5 to 35°C)

  • Dimensions (WxHxD): 19 x 1.8 x 12" (483 x 45 x 300 mm)

  • Weight: 6.2 lb (2.7 kg) (excluding batteries)

SALE: $299.99

 

CLICK THE CONTACT US TAB
ABOVE FOR BETTER PRICING!

FREE S&H in continental US (e-mail for international / offshore USA rates)