Additional Information

Additional Information

Account Navigation

Account Navigation

Currency - All prices are in AUD

Currency - All prices are in AUD
 Loading... Please wait...

AVIOM MIX320-D Complete (6) Person Audio Mixing System $100 Instant Coupon Use Promo Code: $100-OFF


AVIOM MIX320-D Complete (6) Person Audio Mixing System $100 Instant Coupon Use Promo Code: $100-OFF

Free Shipping

Product Description



 Personal Mixing System 


Aviom’s Mix320-D Personal Mixing System has been designed specifically for use with Dante™ enabled consoles and networks. It includes everything you need to create a personal mixing system for six performers. The A320 Personal Mixers get their digital data and power over the same cable, so all you need to do is connect a Cat-5 cable and you're ready to start using the system. The Mix320-D Personal Mixing System makes it easy to add Aviom monitoring to a Dante-enabled mixing console or audio network. No analog input module or console card is required; inputs get patched directly from your Dante network.


The Mix320-D system includes a D400-Dante A-Net Distributor that allows up to 32 channels to be patched from the Dante network to the personal mixing system inputs. The D400-Dante is also used to supply A-Net digital data and DC power to the mixers. The Mix320-D system includes six A320 Personal Mixer for the performers, plus six MT-1a Mic Stand Mounts for attaching the A320 mixers to mic stands, as well as all the Cat-5e cables you'll need to connect the products.


Intuitive Mixing

The A320 Personal Mixer gives performing and recording musicians simple, intuitive control over their monitor mixes. It features a 32-channel mix engine with 16 mono or stereo mix channels buttons and easy to use Stereo Placement controls. Connect headphones, ear buds, or a wireless in-ear monitoring system to the Personal Mixer and you're ready to start mixing.


Distribute Power and Audio Over Cat-5
For distributing the A-Net digital data and DC power to the A320 Personal Mixers, the system includes the D400-Dante A-Net Distributor. The D400-Dante also serves as the system's input device; it allows up to 32 channels from your Dante network to be assigned to the eight powered A-Net ports on its front panel. Stereo Link switches allow adjacent channels to be treated as a stereo pairs on the A320 Personal Mixers where they will appear on a single mix channel button.


System Options
The Mix320-D system uses a Dante network for its inputs. If you use a digital console, check out the Mix320-Y Personal Mixing System which includes a Y1 card for Yamaha® consoles for its inputs. Or, if you have an analog console or recording system, the Mix320-A Personal Mixing System is what you need. It includes the 16-channel, line-level AN-16/i Input Module as its front end. The mixing system packages are also easy to expand when you're ready—just add more Personal Mixers and A-Net Distributors as needed.


  • (1) D400-Dante A-Net Distributor

  • (6) A320 Personal Mixers

  • (6) MT-1a Mic Stand Mounts

  • (7) Cat-5e cables

A320 Specifications:

  • Audio Output: 1/4" TRS stereo, headphone or line level

  • Stereo Mix Output, Headphone/Line

  • Tip: Audio Left

  • Ring: Audio Right

  • Sleeve: Ground

  • A-Net I/O: 1 A-Net In, RJ45 connector; Supports Pro16and Pro16e

  • D/A Conversion: 44.1/48kHz, 24-bit

  • Stereo Operation: Stereo Link, per channel pair set at the input module

  • Variable pan per mono channel or pan/spread per stereo channel pair

  • Headphone Output: 275 mW per side into 50 Ohms (both sides driven)

  • Output Impedance: 5 Ohms

  • Freq. Response: 3Hz-22kHz +0.2dB/-3dB at 50 Ohms

  • THD +N: < 0.003%

  • Output Voltage for Personal Mixers: 24VDC, 0.5 amp

  • Transmitted over the Cat-5e cable

  • Signal to Noise (unweighted): -106dB (measured with zero data into all channels)

  • Latency: 0.880 msec (measured from analog input to analog output)

  • Pro16e A-Net: Use Cat-5e (or better) cable

  • Maximum 400 ft (122 m) between devices

  • Supports Power Over A-NetCat-5 cable: Use shielded Cat-5e (or better) cable to stay below the CISPR 22 Class B, ICES-003, and FCC 47 CFR Part 15 Class B emissions limits.

  • Power: 24 VDC, 0.5 amp

  • Power is supplied over the Cat-5 cable when connected to an Aviom

A-Net Distributor:

  • Dimensions: 10.26" (260.6 mm) wide x 6.14" (155.95mm) deep x 1.91" (48.51 mm) high

  • Weight: 1.3 lbs. (0.59 kg)

  • Optional: MT-1a Mic Stand Mount

D400-Dante Specifications:

  • Dante Interface: 32 channels (44.1/48kHz Sample Rate)

  • Dante Primary I/O: RJ45 connector

  • Dante Secondary I/O: RJ45 connector

  • Dante LEDs: Network Activity (Green); 1GB Network Connection Active (Yellow)

  • A-Net Out to Personal Mixers: Eight RJ45 connectors, powered

  • A-Net Out: Pro16e A-Net

  • RJ45 connector, unpowered

  • LEDs: Power On (Red); Network Sync (Green)

  • Stereo Link: Two 8-position DIP switch blocks (1-16,17-32)

  • Output Voltage for Personal Mixers: 24VDC, 0.5 amp transmitted over the Cat-5e cable

  • A-Net Cables: Front Panel Connections: Shielded Cat-5e (or better) cable must be used to stay below the CISPR 22 Class B, ICES-003, and FCC 47 CFR Part 15 Class B emissions limits. Unshielded Cat-5e cable may be used on all rear panel connections

  • Power Supply: Internal, IEC connector

  • Input Voltage: 100-120 VAC or 200-240 VAC (with selector switch); 50-60Hz @220 W max

  • AC Fuse Types: 115V range: T2.5AL/250V, 230V range: T1.25AL/250V

  • Dimensions: 19" (482.6 mm) wide x 7.386" (187.6 mm) deep; 2U, 3.5" (88.9 mm) high

  • Weight: 12 lbs. (5.44 kg)

SALE: $3599.99




FREE S&H in continental US (e-mail for international / offshore USA rates)

Product Reviews

Find Similar Products by Category