PEAVEY PVXP12 BLUETOOTH 1960w Total Peak Active 12" PA Speaker System Pair

 PVXP12 BLUETOOTH  PEAVEY 

 1960w Total Peak Active 12" PA Speaker System Pair 

The PVXp™ 12 Bluetooth® features a reliable bi-amped power section that provides a total of 980 Watts of peak dynamic power with DSP based compression and limiting. This enclosure features a 12" heavy-duty woofer with a 2 3/8" inch voice coil and 50-ounce magnet, and the RX14™ compression driver with a 1.4 inch titanium diaphragm on a 100 degree horizontal x 50 degree vertical pattern asymmetrical horn.

The PVXp™ 12 Bluetooth® provides two channels with a balanced input via a combination jack that accepts balanced TRS 1/4" inch input as well as a balanced XLR input. A switch is provided to change between line level gain and mic level gain. A third channel is for a Bluetooth source, or alternatively a 1/8" AUX input jack. Each channel has an adjustable Level control and a three-band EQ section. There is a balanced output, a Male XLR, that can feed the mixed signals from the three channels out to another component. A front baffle LED indicator can be set to light when power is on, and when the "soft-limiting" DDT circuit is activated, or it can be turned off altogether. The LCD display and EQ presets, along with other DSP operating parameters are accessed via a one-knob selector.
 

Features:

• Two-way bi-amped sound reinforcement enclosure

• RX14™ compression driver, with 1.4 inch titanium diaphragm

• Reliable fan-cooled power amps with DSP protection

• Total of 980W peak dynamic power

• DSP control for precise crossover, EQ and limiting functions

• Bluetooth input is via a dedicated input channel

• Mix/Thru Output is via a male XLR jack

• Durable plastic injection-molded trapezoidal enclosure

• Extra angled section on right side allows floor monitor use

• Pole mount molded-in for 1 3/8" diameter poles

• Top, bottom and right side flying point inserts

• 12 heavy-duty woofer with 2 3/8" voice coil & 50 oz. magnet

• Full-coverage heavy-duty perforated steel grilles, with powder coat finish

• DSP I/O is at 48 kHz and 24 bits, internal processing is 56 bit double-precision

• Peavey's Quadratic Throat Waveguide technology, 100 by 50 degree coverage

• Asymmetrical horn aims the sound down 10 degrees, at the audience, not over their heads

• Analog input is via a combo female XLR and 1/4" TRS phone jack with balanced input

• Three channels in total, two for analog, and one for Bluetooth or AUX input via a 1/8 jack

• Each channel has a level control and a 3-band EQ section to adjust and shape the input signals

Specifications:

• Frequency Range, 1 meter on-axis, swept-sine in ½ Space environment: 54 Hz to 20 kHz

• Frequency Response, 1 meter on-axis, swept-sine in anechoic environment: 63 Hz to 20 kHz (±3 dB)

• Usable Low Frequency limit (-10 dB point anechoic): 56 Hz

• Nominal sensitivity (1W @1M, swept sine input in anechoic environment): 97 dB (average)

• Maximum Sound Pressure Level (1 meter): 127 dB SPL peak with music

• Radiation Angle measured at -6 dB point of polar response: Nominal: 100 degrees horizontal X 50 degrees vertical (Axis of the vertical main polar lobe is angled down 10 degrees, resulting in the angular

• pattern with respect to straight ahead being +15, -35 degrees)

• Transducer Complement: Heavy-duty 12” woofer with 2 3/8” voice coil & 50 oz. magnet RX14™ 1.4” titanium diaphragm dynamic compression driver

• Box Tuning Frequency: 65 Hz

• Electroacoustic crossover frequency: 1,800 Hz

• Crossover type: Advanced DSP based filter also providing driver EQ, level matching, bass boost, limiting, compression and subsonic filtering

• Crossover Slopes: Nominally 24 dB/octave (4th order) low pass, 24dB/octave (fourth order) high pass, both with driver EQ incorporated

• Input Connections (Each, Channels 1 and 2): One combo female XLR and1/4" phone jack providing balanced line-level operation, Mic/Line switch provides extra gain for microphone use

• Input Connections (Channel 3): AUX is a 1/8" phone type jack. Channel 3 is nominally the Bluetooth® signal source channel

• Output Connection: One male XLR jack intended for the use of linking multiple PVX™p 12's in a line or to provide a full range version of the input signal

• Enclosure Materials & Finish: Black injection-molded plastic with textured surface, black powder-coated perforated grilles

• Mounting provisions: Unit has two sets of two M10 inserts, one pair on the top, and one pair on the bottom

• Additional mounting points are a set of four M8 inserts on the top and four on the right side in the handle recess and a set of four on the bottom, which use the Peavey VersaMount™ 70 mounting bracket

• Four rubber feet provide vibration free floor or stage use, and a molded-in stand mounting cup is on the bottom

• Dimensions (H x W x D) Front: 24.50 in. x 16.10 in. x 15.00 in. / 622 mm x 409 mm x 381 mm

• Dimensions (H x W x D) Rear: 22.75 in. x 8.75 in. x 15.00 in. / 578 mm x 222 mm x 381 mm

• Net Weight: 42 Lbs. (19.1 kg)

SALE: $1199.99
FREE S&H in continental US (e-mail for international / offshore USA rates)