YORKVILLE ELITE E10P Active 1300w Peak Built-in Mixer EQ Compact PA Speaker Pair

 E10P  YORKVILLE 

 Active Compact PA Speaker Pair 

The Yorkville E10P is an advanced, compact two-way active loudspeaker designed for a wide variety of pro-audio applications. Built for maximum versatility, the E10P input section will easily handle microphone or line level inputs through the XLR / TRS Combi-jack. Bass and Treble EQ in addition to Level control and a Mic/Line input gain selector ensure the E10P can handle virtually any audio source.

A Live/Playback EQ preset selector, a 100Hz/50Hz low-frequency Roll-off selector (no crossover needed for subs), a full-time Limiter with LED indicator, a Clip LED, a Link output ensure the E10P can adapt easily to any audio application including use as a front-of-house PA loudspeaker, as a personal wedge monitor or as a single unit micro PA for a paging and playback system (no additional mixer required).

A lightweight, low-noise 300-Watt Class-D amplifier drives the low frequency 10-inch woofer while a two-tier 50-Watt amplifier capable of delivering an exceptionally clear and linear high-frequency response powers the 1-inch horn. An on-board active DSP based crossover ensures that the woofer and horn operate optimally while protecting the high quality speaker components.

Yorkville's E10P features a powerful yet lightweight 10-inch low-frequency driver with a neodymium magnet, a silky-smooth 1-inch horn and driver and an enclosure built from voidless 15mm multi-ply Baltic birch for light weight with classic Elite ruggedness. That durability is engineered into the multi-angle enclosure pioneered for the Elite line that enables the E10P to operate vertically on a stand or horizontally as a stage monitor. For added convenience, the E10P easily converts between 120VAC, 230VAC or 240VAC.

Features:

• Integrated 650 Watt Amplifier Peak (325 Watts Program)

• 10-inch Woofer / 1-inch Compression Driver

• Max SPL 129dB Peak (123dB Continuous)

• Bi-Amplified Power Module

• Designed for Front-of-House or Monitor Applications

• 100º x 25º Horn with Peak and Average Horn Protection

• Two Band EQ with LF Roll-Off and Live/Playback Mode Switches

• Combi-Jack XLR and 1/4-inch Input

• Integrated All Metal Speaker Stand mount Adaptor

• Solid 5/8-inch (15mm) Birch Plywood Construction

• Made in Canada

Specifications:

• System Type: Powered Loudspeaker

• Active or Passive: Active

• Program Power (Watts): 325 Watts (650 Watts Peak)

• Max SPL (dB): 129dB Peak (123dB Continuous)

• Frequency Response (Hz +/- 3db): 65 - 20k

• Crossover Frequency (Hz): 1500

• Driver Configuration: 10-inch / 1-inch

• HF Dispersion (°H x °V): 100 x 25

• HF Protection: Peak and Average Limiting

• LF Protection: Excursion, RMS

• Cooling Scheme: Convection

• Power Cable: Removable IEC

• Power Switch: Yes

• Power Consumption (typ/max): 120VA / 200VA

• Inputs: 1 Combijack (XLR / 1/4-inch)

• Input Impedance (Bal/UnBal): 4k ohms / 2k ohms

• Input Sensitivity (Vrms Sine): Line in 1.4 at center, 0.35 at max

• Level Controls: Gain

• EQ Controls: Bass, Treble

• Limiter: Peak and Average limiting on horn and woofer

• LED Indicators: Power, Clip

• Corners: Metal

• Feet: Plastic Glides

• Flying Hardware: 5 (2 Top, 2 Bottom, 1 Pullback)

• Bar Handles: One Side

• Pole Mount Adapter (1 3/8"-3.5cm): Yes

• Enclosure Materials: 15mm (5/8-inch) 11-ply Russian Birch

• Port(s): Rear

• Grille: Perforated Metal

• Covering / Finish: Black Ozite (Carpet)

• Optional Covering / Finishes: Black Ultrathane Paint (E10PB)

• Dimensions (DWH xbackW, inches): 12 x 13 x 18.5 x5.5

• Dimensions (DWH xbackW, cm): 30 x 33 x 45 x 14

• Weight (lbs/kg): 34 / 15.5

SALE: $1999.999

FREE S&H in continental US (e-mail for international / offshore USA rates)